REV 1.0
WRM-10P S2 USER’S MANUAL
67
3.11.10. Erasing Test Records From a Connected USB Flash Drive
Follow the steps below to erase an individual test record or all test records from a connected
USB Flash drive:
a.
Insert the USB Flash drive containing the test records in the WRM's "USB MEM" port,
and then start from the "START-UP" menu:
Press the
[2]
key (
TEST RECORDS
).
b.
The following screen will be displayed:
Press the
[6]
key (
ERASE RECORD
).
c.
The following screen will be displayed:
Press the
[2]
key (
ERASE THUMB DRV REC
).
1.ERASE INTERNAL REC
2.ERASE THUMB DRV REC
1.PRINT RECORD
2.DISPLAY RECORD
3.SAVE RECORD
4.RESTORE RECORD
5.RECORD DIRECTORY
6.ERASE RECORD
7.COPY TO THUMB DRIVE
1.RUN TEST
2.TEST RECORDS
3.DIAGNOSTICS
4.SETUP
Содержание Vanguard Instruments WRM-10P S2
