WRM-10P S2 USER’S MANUAL REV 1.0
26
d.
The following screen will be displayed
Type the number of "RAISE" taps (not counting neutral) the LTC or Voltage Regulator
has using the keypad, and then press the
[ENTER]
key. We will enter “3” for our
example.
e.
The following screen will be displayed:
Select the number of "NEUTRAL" taps by pressing the corresponding key. For this
example we well select "ONE" by pressing the
[1]
key.
f.
The following screen will be displayed:
If the tap information is correct, press the
[1]
key (
YES
) and
continue to step g
.
If the tap information is incorrect, press the
[2]
key (
NO
) and
return to step d
.
3 LOWER-1N- 3 RAISE
IS THIS CORRECT?
1. YES
2. NO
NUMBER OF NEUT TAPS:
1. ONE
2. THREE
3. FIVE
ENTER # OF RAISE
TAPS, NOT COUNTING
NEUTRAL (1-23): 0
Содержание Vanguard Instruments WRM-10P S2
