Digital Link DL600E, Руководство пользователя

Страница: 94 / 147

5-18 DL600E E1 Data Multiplexer UserÕs Guide
2
To select a network timeslot:
Ñ Go to
TS CONFIG NET
by pressing the
Up
or
Down Arrow .
You can now select a network timeslot and allocate it.
Ñ Press
ENTER
to display the slot 1 status.
Ñ Press
Up Arrow
to open the display for network timeslot 2.
Ñ Press the
Up Arrow
to move to
IDLE
and press
ENTER
then
ENTER
again to conÞrm the change.
Ñ For timeslot 5, press
ENTER
to open the display and
ENTER
again to activate edit mode for the port.
Ñ Press
Up Arrow
and
ENTER
to move to and select data port 2.
3
Use this method to manually allocate each network timeslot to
a data port.
ConÞguring for SNMP
To conÞgure the
DL600E
unit for
SNMP
from the front panel, use the
SNMP CONFIG
menu.
For a description of the SNMP parameters refer to ÒConÞguring for
SNMPÓ in Chapter 3.
The parameters in the
SNMP CONFIG
menu are
TS CONFIG NET
NET TS01 DATA01
NET TS02 DATA01
SNMP CONFIG
ENTER
RST CMMUNTY STR
IP 0.0.0.0
MSK,0.0.0.0
1ST NMS,0.0.0.0
SNMP ENABLE NO
SNMP PORT COMM