Digital Link DL600E, Руководство пользователя

Страница: 53 / 147

ConÞguring the DL600E Unit 3-19
2
To specify Data Port
1:
Ñ Press the
Down Arrow
to move to
Allocate by Port
and
Return
to activate edit mode.
Ñ Press
0 1
(for Data Port
01)
and
Return
.
D01
appears in
Allocate by Port
and the start timeslot
begins to blink. (You can specify only port
1.)
3
To specify the start timeslot and end timeslot:
Ñ Press
1
and
Return
to specify start timeslot
1.
DATA01 TS01
appears; end timeslot Þeld starts to blink.
Ñ Press
1 4
and
Return
and
y
for timeslot
14.
Ñ appears in the Allocate by Port
Þeld and timeslots 1 through 14 are allocated to port 1; all other
slots are idle.
Ñ
Press
y
to conÞrm your action when prompted.
Refer to the example in Figure 3-4.
Allocating Timeslots Manually
To manually allocate timeslots to a speciÞc data port, move to the
timeslot and specify the port. You must set the other timeslots to
Idle
.
Timeslots for the AUX E1 port can only be allocated manually.
Follow the procedure described in the example below.
Example: You want to allocate timeslots
3, 7, 9, 14,
and
15
to data port
1.
Your plan is to specify port
1
for these timeslots and for
IDLE
for all
other timeslots.
1
To select Manual .
Ñ Move to Allocation Type using the
Up
or
Down Arrows
and press
Return
to activate edit mode.
Ñ Cycle through the options using the
Up
or
Down Arrows.
Ñ To select Manual , press
Return,
then press
y
to conÞrm.
2
To conÞgure timeslot
1
as IDLE .
Ñ Move to timeslot
1
using the
Down Arrows
.
Ñ Press
Return
to activate edit mode.
The system prompts:
Type the UP or DOWN arrows to change the selection, or
type a port number (NN or I for IDLE):
DATA01 TS01-TS14 896 Kb/s