Digital Link DL600E, Руководство пользователя

Страница: 90 / 147

5-14 DL600E E1 Data Multiplexer UserÕs Guide
ConÞguring the Data Ports
Use
DATA 1 CONFIG, DATA 2 CONFIG, DATA 3 CONFIG,
and so on to
conÞgure data ports
.
Refer to ÒConÞguring the Data PortsÓ in Chapter 3
for a description of the parameters.
To conÞgure the data ports:
1
From the
CONFIGURATION
menu, press
ENTER
and open
DATA
1 CONFIG
using the
Up
or
Down Arrows
and
ENTER
.
DATA 1 NORMAL
appears. (
NORMAL
is the default code.)
2
Press the
Down Arrow
to move to the next parameter,
LOS
.
DATA 1 LOS,RTS
appears.
RTS
is the default LOS parameter.
3
Press
ENTER
to activate edit mode
.
RTS
starts to blink.
(Or press
EXIT
to take no action and move to the next item)
Press the
Up
or
Down Arrows
to cycle through the available
LOS
options and press
ENTER
to select an option.
4
ConÞgure the mode, format and clock for data port 1 using this
method. Repeat for the other data ports using the appropriate
menu for the data port.
Allocating Timeslots
Use the
TIMESLOT CONFIG
menu to view and allocate network
timeslots. The default timeslot allocation is all
24
time slots allocated to
port 1 Ñ
If you make an incorrect selection, the system responds with an error
message, such as
ERR DTE01 DTE02
For information on allocating timeslots refer to ÒAllocating TimeslotsÓ
in Chapter 3.
DTE01 TS = 01 -- 31