Denkovi smartDEN Opener, Руководство пользователя

Страница: 81 / 119

smartDEN Opener User Manual
24 Apr 2018
- 81 -
This page provides settings about smartDEN Opener 's device name and location, username
and passwords, MQTT and HTTP access, HTTP settings, IP camera settings and RF remote
settings. Parameters in this page are given below:

Device Name - this parameter is used for naming smartDEN Opener . On each page in the
web server in the upper right corner is shown Device Name parameter. When MQTT
notifications and emails are desired each notification and email will contain this Device
Name . There are 15 allowed symbols reserved for this parameter (see Appendix 3 );

Device Location - this parameter is used to tell smartDEN Opener 's location. Useful
parameter when more than one device is used from one user (for example when several
garage doors in different cities are owned by one user). When MQTT notifications and
emails are desired each notification and email will consist of
Device Location . There are
15 allowed symbols reserved for this parameter (see Appendix 3 );

New Username - this parameter is used for changing the username used to log in to web
server. The new username should be minimum 5 symbols and maximum 15 symbols.

Repeat Username - this parameter must be equal to New Username that was entered if
username change is desired;

New Password - this parameter is used for changing the password used to log in to web
server. The new password should be minimum 5 symbols and maximum 15 symbols.

Repeat Password - this parameter must be equal to New Password that was entered if
password change is desired;
Username and Password for the web server could be changed only both together. If
only username change is desired for example, you must enter the old password in New
Password field.

Admin Enable - this parameter allows Admin access for HTTP and MQTT resources. With
this option enabled Admin could use the DAE-aModules Mobile Application in both XML
and Cloud versions of smartDEN Opener . If Cloud version is used then notifications could
be received by Admin. This parameter also allows using HTTP Protocol in both XML and
JSON versions as well as MQTT Protocol
(see 12. smartDEN Opener's MQTT Protocol ).
Admin is the higher priority user. Admin can disable/enable Guest access, but Guest
could not make such changes. Admin is also the only one user who could receive
notifications. By default this parameter is Enabled;

Admin Password - in order to use both MQTT and HTTP protocols as well as DAE-
aModules Mobile Application this password must be used for identification. By default
Admin Password is "admin". There are 15 allowed symbols reserved for this parameter
(see Appendix 3 Table 17.1 );

Guest Enable - this parameter allows Guest access for HTTP and MQTT resources. With
this option enabled Guest could use the DAE-aModules Mobile Application in both XML and
Cloud versions of smartDEN Opener . This parameter also allows using HTTP Protocol in
both XML and JSON versions as well as MQTT Protocol (see 12. smartDEN Opener's
MQTT Protocol ). Guest has the same rights as Admin with the difference that can not
disable Admin 's access. By default this parameter is Disabled;

Guest Password - in order to use both MQTT and HTTP protocols as well as DAE-
aModules Mobile Application this password must be used for identification. By default
Guest Password is "guest". There are 15 allowed symbols reserved for this parameter
(see Appendix 3 );
Admin User has higher priority than Guest User .