Denkovi smartDEN Opener, Руководство пользователя

Страница: 85 / 119

smartDEN Opener User Manual
24 Apr 2018
- 85 -

Log Network Events - this parameter again is common for both network modes. It is used
to write to system log messages about Network;

Network Name (SSID) - this is the SSID of network that smartDEN Opener will try to
connect to. There is "Scan" button provided to scan for available networks. When clicked
smartDEN Opener will scan networks around and will report them in a dropdown select
box. When click on some of the choices in the dropdown select box, Network Name will
automatically equal to selected network. In scan report there are shown settings like SSID
(name), type of encryption, signal strength and channel of the network. If a network is
hidden it may not exist in scan report. There are 30 allowed symbols reserved for this
parameter (see
Appendix 3 );
smartDEN Opener can connect to network with following network encryption types:
o
Open Network (No Encryption)
o
WEP
o
WPA Personal
o
WPA2 Personal
o
WPA/WPA2 Personal Mixed

Signal Strength - this parameters visualize signal strength of the network which smartDEN
Opener is currently connected. With the " Refresh " button this value will be refreshed.
Useful parameter especially when moving the device;

MAC Address - this is smartDEN Opener's Station MAC Address ;

Obtain an IP Address Automatically - this is DHCP option of the Station configuration. If
set to "ENABLE" then smartDEN Opener will get address from router's DHCP server
automatically. When "DISABLE" option is selected then the user should configure the IP
addresses of
smartDEN Opener manually.
If incorrect settings are set, smartDEN Opener may not connect to the desired network.
Use this parameter with attention and double check before saving!

IP Address - IP address of the device;

Subnet Mask - subnet mask;

Gateway Address - network gateway;

DNS1 - DNS1 address;

DNS2 - DNS2 address;
IP Address, Subnet Mask, Gateway Address, DNS1 and DNS2 should be in format
x.x.x.x where x is number from 0
÷ 255.

Save - this button is used to save STA network configuration. When clicked, the above STA
settings will be applied on next reboot;

Reboot - reboot the device.
You have to reboot the device for these settings to apply.