Denkovi smartDEN Opener, Руководство пользователя

Страница: 87 / 119

smartDEN Opener User Manual
24 Apr 2018
- 87 -

Date - sets the date of the onboard RTC module. Format is (dd/mm/yyyy). Date can be
selected when clicked on the text field when Auto Synchronization option is not checked.
Calendar will pop-up and date selection can be made ( Figure 10.37 ).

Day of Week - shows current day of week stored in smartDEN Opener's onboard RTC
module. This parameter is read only;

Time - sets the time of the onboard RTC module. Format is (hh/mm). Time can be set when
Auto Synchronization option is not checked;

Time Zone - time zone selection drop-down list.

Auto Synchronization - enables Date and Time auto synchronization from ntp server.
When checked Time Server and Synchronization Period fields are shown. Time got from
NTP server will be Greenwich Mean Time (GMT).
This parameter will work only in STA network mode.

Time Server - this could be any public or private NTP server. On the right is located port
number. There are 30 allowed symbols reserved for this parameter (see Appendix 3 );

Synchronization Period - this is the time in which Date / Time will be updated from NTP
server. Its
could be in range 10 ÷ 1440 minutes;

Daylight Savings - daylight savings time can be defined from this option. In the period
defined one hour will be added to current time;

Start Period - this is the start period of Daylight Savings Time . On this day at 03:00 am,
time shifts forward to 04:00 am;

End Period - this is the end period of Daylight Savings Time . On this day at 04:00 am,
time returns back to 03:00 am;

Log Date and Time Events - used to write messages to system log file about NTP server
successful / unsuccessful synchronization events;