Denkovi smartDEN Opener, Руководство пользователя

Страница: 36 / 119

smartDEN Opener User Manual
24 Apr 2018
- 36 -
Figure 6.32. smartDEN Opener - Cloud Settings
3. Click " Test Connection " button - if successful connection is obtained " smartDEN Opener -
Cloud found! " message will be visualized. If connection is unsuccessful " smartDEN Opener -
Cloud not found! " message will be visualized.
4. If everything is OK then click " Add Device " button on bottom.
5. Each other steps are just same as smartDEN Opener - XML (point 6 and 7).
More information about DAE-aModules application could be found on
http://denkovi.com/ DAE-aModules .
6.12. Connecting smartDEN Opener to Wi-Fi network
smartDEN Opener provides more functionality when has Internet access. This could be done
by connecting the module to a router. By default smartDEN Opener is shipped with default
settings which starts the board in Access Point mode (AP). The user must connect to smartDEN
Opener's Access Point network (described in 6.9. Communication Setup ) and set up the
network settings in order to connect the module to a router.
1. When connected to Access Point network of smartDEN Opener go to " Network Settings "
page and change network mode to " STA ".
2. There is provided " Scan " button which will scan the available networks.
3. Next dropdown list will be available with found networks. Now the user could select the
desired network from this list or just type network's SSID.
4. Password for the network must be typed if network is protected. If open network is used,
leave this field empty.