Denkovi smartDEN Opener, Руководство пользователя

Страница: 39 / 119

smartDEN Opener User Manual
24 Apr 2018
- 39 -
6.13.2.
Via RF remote
1. Press the two buttons from the RF remote at the same time. The smartDEN Opener status
led will start flashing (for about 5 sec);
2. Wait until the status led stop flashing;
3. Release the buttons;
4. Pres RF remote "Open" button so the Main Controlled Device goes to
OPENED position;
5. Release the RF remote "Open" button;
6. Press the RF remote "Close" button;
7. Wait until the Main Controlled Device goes to
CLOSED position. The status led will blink
with period 0.5 sec during this time;
8. Release the RF remote "Close" button. Now the Open/Close time is stored in memory;
9. Press the both RF buttons together. The smartDEN Opener status led will become flashing
for about 7 sec;
10. Wait until the status led stop flashing;
11. Release the buttons;
12. The
smartDEN Opener is rebooted with the new opening/closing time.
Figure 6.36. Open/Close Time programming via RF Remote Controller
6.14. Setting the protections
6.14.1.
Setting the primary current protection
smartDEN Opener provides current protection for Main Controlled Device's motor. It measures
the current through Main Controlled Device's motor and if the measured current (consumed by the
motor) is more than certain level, the Main Controlled Device stop closing and start opening
almost immediately automatically. Such kind of protection is very useful in cases where the Main
Controlled Device (garage door, barrier) may hits an object (car for example) and in that moment
the motor current consumption is increased. The protection parameters can be set from the web
server, in page for the Main Controlled Device:

Current Protection Limit, units - this is the level of measured current which triggers
opening the Main Controlled Device. If the current units become higher than this value, the
Main Controlled Device will start
OPENING . It is in ADC raw units. If this parameter is 1024,
the current protection is disabled;

Real Time Current Sensor Value , units - when closing the Main Controlled Device this
parameter show the current motor consumption for reference. It is in ADC raw units;

Max Current Sensor Value , units - the maximum measured current while closing the Main
Controlled Device . It is in ADC raw units;
Figure 6.37. Current protection options (Main Controlled Device page)