Denkovi smartDEN Opener, Руководство пользователя

Страница: 35 / 119

smartDEN Opener User Manual
24 Apr 2018
- 35 -
Figure 6.31. DAE-aModules additional tabs
When smartDEN Opener - XML board is used over Internet, port forwarding might be
needed. For more information see this Application Note: http://denkovi.com/access-
devices-from-the-internet
6.11.2.
smartDEN Opener - Cloud
This communication usually is used in Station operating mode (STA). With such added device
notifications could be received (see 16.2. Notifications ). This communication uses Internet and it
dependents on third party MQTT brokers (by default).
Be sure that Admin Enable option is checked from smartDEN Opener's web server
and MQTT Client is with state "Connected" (see 10. Web Access)!
1. Open DAE-aModules application and click " Add New Device " button.
2. Add smartDEN Opener - Cloud board. In this example default settings are used ( Figure
6.32 ).
o
MQTT Server - in this example is used the default "iot.eclipse.org". There are also other
public MQTT Brokers which could be used;
o
MQTT Server Port - the default is 1883;
o
MAC Address - in this field should be typed smartDEN Opener 's Station mode MAC
Address (could be found in MQTT page on the web server);
o
User Name - there are only two possible choices for this option - "admin" and "guest". In
our example Admin user is used so "admin" username will be used. Note that Guest
account is
DISABLED by DEFAULT and could not receive notifications;
o
Password - this is user account's password. By default for Admin user it is "admin";
o
Connection Timeout - in our example default value is used - 3000ms;
o
Connection Retries - again default value is used - 3;