Denkovi smartDEN Opener, Руководство пользователя

Страница: 78 / 119

smartDEN Opener User Manual
24 Apr 2018
- 78 -
10.6.4.
Relays
Figure 10.29. Relays Tab Overview
smartDEN Opener provides two relay outputs:

Enable Relays' Logs - enables/disables writing to logs when there is relay state change.

Description - allows naming the relay output. There are 10 allowed symbols reserved for
description (see Appendix 3 ).

Relay Switch Mode - this parameter sets the principle of relay switching. There are three
possible choices:
o
Normal - in this switching mode relay will be turned on when ON command is send and
will turned off when OFF command is send (no matter who/what sends the command);
o
Timer On - in this mode the relay could be turned on with ON command, but when
turned off it will turn on again after defined interval by the Time parameter;
o
Timer Off - in this mode the relay could be turned off with OFF command, but when
turned on it will turn off again after defined interval by the Time parameter;

Time, sec - this is the time for Timer On and Timer Off switching modes. The time is set in
seconds and has ±1 second tolerance. This value could be in range 0 ÷ 65535 seconds.
Below is given an example of Relay Switch Mode parameter. Note that commands could be
received from Digital Inputs , Analog Input , Temperature Input , web server , Mobile
Application , communication protocols , etc.