smartDEN Opener
User Manual
24 Apr 2018
- 16 -
6. Installation
This device must be installed by qualified personnel;
This device must not be installed directly outdoors;
Installation consists of:
o
Mounting the device;
o
Connecting motor controlled load, in way described below;
o
Connecting other loads to relays;
o
Providing power;
o
Connecting to an IP network and configuring via a web browser.
6.1. Box mounting
6.1.1.
DIN rail box
Figure 6.1.
Mounting the device to DIN rail
smartDEN Opener
can be mounted to a standard (35mm by 7.55mm) DIN rail. Attach the
module to the DIN rail by hooking the hook on the back of the enclosure to the DIN rail and then
snap the bottom hook into place.
6.1.2.
Distribution box
Figure 6.2.
Mounting the device to DIN rail
smartDEN Opener
in distribution box could be mounted to wall with at least two dowels.
Содержание smartDEN Opener
