Denkovi smartDEN Opener, Руководство пользователя

Страница: 44 / 119

smartDEN Opener User Manual
24 Apr 2018
- 44 -
9. Main Controlled Device
smartDEN Opener provides output to control load driven by AC/DC motor. This load is called
Main Controlled Device -garage door, blind, awning, window, barrier etc. Main Controlled Device
has five states:
9.1. OPENING
OPENING is the state which the Main Controlled Device was in STOPPED or CLOSED state
and OPEN command is received (from RF Remote Controlled, web server, etc.). Then voltage is
provided between COM and OPEN terminals on motor output terminal. Open / Close Time starts
decrementing until time elapse. When time elapse motor driven load is stopped and no voltage is
provided on motor output terminal. Main Controlled Device is now in
OPENED state.
If during OPENING state OPEN command is received Main Controlled Device will continue
OPENING .
If during OPENING state CLOSE command is received Main Controlled Device will go to
STOPPED state.
If during OPENING state STOP command is received Main Controlled Device will go to
STOPPED state.
9.2. CLOSING
CLOSING is the state which the Main Controlled Device was in STOPPED or OPENED state
and CLOSE command is received (from RF remote, web server, etc.). Then voltage is provided
between COM and CLOSE terminals on motor output terminal. Open / Close Time starts
decrementing until time elapse. When time elapse motor driven load is stopped and no voltage is
provided on motor output terminal. Main Controlled Device is now in
CLOSED state.
If during CLOSING state CLOSE command is received Main Controlled Device will continue
CLOSING .
If during CLOSING state OPEN command is received Main Controlled Device will go to
STOPPED state.
If during CLOSING state STOP command is received Main Controlled Device will go to
STOPPED state.
9.3. OPENED
OPENED is the state which the Main Controlled Device was reached one of its end position.
Then no voltage is provided on motor output terminal.
If during OPENED state CLOSE command is received Main Controlled Device will start
CLOSING .
If during OPENED state OPEN command is received Main Controlled Device will take no
action.
If during OPENED state STOP command is received Main Controlled Device will go to
STOPPED state.
9.4. CLOSED
CLOSED is the state which the Main Controlled Device was reached one of its end position.
Then no voltage is provided on motor output terminal.
If during CLOSED state OPEN command is received Main Controlled Device will start
OPENING .