Denkovi smartDEN Opener, Руководство пользователя

Страница: 113 / 119

smartDEN Opener User Manual
24 Apr 2018
- 113 -
Figure 16.3. Notification Preview
16.2. Location Control
This option could be used to control smartDEN Opener's Main Controlled Device via GPS
coordinates. Useful feature especially for garage doors. There are several settings to configure:

Accuracy - provides three options:
o
Disable - DAE-aModules will disable Location Control ;
o
Low Accuracy - this option will use location from network and will keep battery charge;
o
High Accuracy - this option may use GPS location for higher accuracy. Note that battery
could discharge faster.

Refresh Time - this option defines the minimum time between two GPS measurements.
Note that smaller Refresh Time will cause faster battery discharging;

Triggering Distance - this option defines the minimum distance between every two GPS
measurements. Note that smaller Triggering Distance will cause faster battery discharge.
16.3. Control a Relay or Main Controlled Device by GPS location
There are two available options to control a relay or the Main Controlled Device by location -
GPS Inside (set relay/door on/open while entering the perimeter) or GPS Outside (set relay/door
on/open while leaving the perimeter):
1. In " Control " tab of DAE-aModules click on the button in the upper right corner.
2. Click on the appeared "Settings" button.
3. Then select the desired relay or Main Controlled Device and click on it. A pop-up window will
appear. From this window the name of the relay could be changed as well as special mode
could be selected.