Delta VFD-ED Series, Руководство пользователя

Страница: 375 / 389

Appendix B. Revision History

VFD-ED
B-2
Major Changes
Description Chapter
Vdc is corrected to V
DC
；
Vac is corrected to V
AC
. All sections
“Before Using” updated Preface
 For Section 1-5 RFI Switch, all “cut off RFI short circuit cable” is corrected to
“remove RFI switch”, "according to IEC 61800-3" is deleted, one “RFI capacitor”
is corrected to “RFI switch” for particular attention under Isolating Main Power
from Ground.
 Figure, dimension, and notes for Frame C are updated in Section 1-6
Dimensions.
Chapter 1
Models’ information about horsepower and capacity are combined into one table for
Section 2-2 Minimum Mounting Clearance. Chapter 2
Frame E wring diagram (braking resistor added) updated Chapter 3
Main circuit diagram for frame E updated (braking resistor added) Chapter 4
 Figures for control board switch are respectively placed into the Default (NPN
mode) column for SG1+ and SG1- terminals and SW2 terminal.
 The figure for AUI and AUI2 analog voltage frequency updated
 Descriptions for AFM1 and AFM2 Default (NPN mode) are combined into one
column.
Chapter 5
 Table for brake resistors and brake units used in AC motor drives updated: table
is changed from one to two (10% ED and 30% ED), “Braking Resistor Value
Spec. for Each AC Motor Drive” column is deleted, “Braking Resistor Value Spec.
for Each AC Motor Drive” column is corrected to “Delta’s Part No.”, values in the
tables are all updated, note 1 under the tables are updated.
 Section 6-4 AC/DC Reactor all updated
 Zero phase reactors are changed into two types: casing with mechanical fixed
part and casing without mechanical fixed part
 Diagrams for installing zero phase reactors are changed into two methods: single
turn and multi-turn.
 Zero phase reactor models for input side (R/S/T) of 220V and 460V models
updated. Zero phase reactor models for output side (U/V/W) of 220V and 460V
models deleted.
 Figures for EMC filters updated
 Menu items under MENU key for KPC-CC01 keypad functions are corrected to
13 items and unsupported item 4, 5 and 7 are noted.
 HAND and AUTO keys for KPC-CC01 keypad functions are corrected to “no
function”
 LED function descriptions updated
 The method for downloading the driver file (IFD6530_Drivers.exe) is changed
from CD to URL address.
Chapter 6