Delta VFD-ED Series, Руководство пользователя

Страница: 243 / 389

Ch12 Descriptions of Parameter Settings | VFD-ED
12-32

External Terminal Output Current Level
Control Mode VF VFPG SVC FOCPG FOCPM Default: 0
Settings 0–100%
 When output current is
≥
Pr.02-33, it activates the multi-function output terminal (Pr.02-11–Pr.02-22 are set
to 27).
 When output current is < Pr.02-33, it activates the multi-function output terminal (Pr.02-11–Pr.02-22 are set
to 28).

External Terminal Output Speed Limit
Control Mode VF VFPG SVC FOCPG FOCPM Default: 0.00
Settings
0.00–

400.00 Hz (this is motor speed when using with PG)
 When output frequency is
≥
02-34, it activates the multi-function terminal (Pr.02-11–Pr.02-22 are set to 29).
 When output frequency is < 02-34, it activates the multi-function terminal (Pr.02-11–Pr.02-22 are set to 30).

Mechanical Brake Detection Time
Control Mode VF VFPG SVC FOCPG FOCPM Default: 0.00
Settings 0.00–10.00 sec.
 When the mechanical brake function (Pr.02-01–Pr.02-08 are set to 42) is not enabled within this setting
time, the drive displays error code 64 (MBF) mechanical brake error.

Magnetic Contactor Detection Time
Control Mode VF VFPG SVC FOCPG FOCPM Default:0.00
Settings 0.00–10.00 sec.
 When the magnetic contactor function (Pr.02-01–02-08 are set to 41) is not enabled within this setting
time, the drive displays error code 66 (MCF) magnetic contactor error.
Torque Check
Control Mode VF VFPG SVC FOCPG FOCPM Default: 0
Settings 0: Disable
1: Enable

When the drive receives the operation signal, the drive checks if there is a torque output. When enabled,
the drive releases the mechanical brake after confirming that there is a torque output.