Delta VFD-ED Series, Руководство пользователя

Страница: 238 / 389

Ch12 Descriptions of Parameter Settings | VFD-ED
12-27
28
Output when current <
Pr.02-33
Active when current is < Pr.02-33.
29
Output when frequency
≥
Pr.02-34
Active when frequency is
≥
Pr.02-34.
30
Output when frequency <
Pr.02-34
Active when frequency is < Pr.02-34.
31
Power generation direction
and status verification
Activate when the power generation direction is verified.
32
Power generation direction Activate when the power generation direction runs forward.
33
Zero speed (actual output
frequency)
Active when the actual output frequency is 0. The drive should be in
RUN mode.
34
Zero speed with stop (actual
output frequency)
Active when the actual output frequency is 0 or Stop. The drive should
be in RUN mode.
35
Fault output option 1
(Pr.06-22)
Active when Pr.06-22 is ON.
36
Fault output option 2
(Pr.06-23)
Active when Pr.06-23 is ON.
37
Fault output option 3
(Pr.06-24)
Active when Pr.06-24 is ON.
38
Fault output option 4
(Pr.06-25)
Active when Pr.06-25 is ON.
39 Reserved
40
Speed reached (including zero
speed)
Active when the output frequency reaches the frequency setting.
41 Reserved
42 STO Output Error
Status of drive
Status of safety output
Status A (MO=42)
Normal Broken circuit (open)
STO Short circuit (closed) *Setting of logic output
STL1–STL3 Short circuit (closed) B is on page 16-6.
43–44 Direct Docking Mode only Contact Delta for more information
45 Reserved
46
Retrying after a fault has
occurred indication
Retry multiple outputs after an error has occurred. When the retry
period has finished, MO stops.
47 Direct Docking Mode only Contact Delta for more information
48
Control output of MPSCC
(Motor Phase Short Circuit
Contactor)
Active when the drive receives a STOP command.
49
Emergency power mode
action
Active when the drive receives a signal from the host controller
(Pr.02-01–02-08=54) after Pr.06-71 time.