Delta VFD-ED Series, Руководство пользователя

Страница: 240 / 389

Ch12 Descriptions of Parameter Settings | VFD-ED
12-29
Pr.02-24=1
Enable Drive
0 1
Multi-function
output
MO= 15
0 False False
1 False True
After both Enable Drive function signal and MO15 output, the drive starts to count Pr.02-31.

Desired Frequency Reached 1
Control Mode VF VFPG SVC FOCPG FOCPM Default: 60.00/50.00
Settings 0.00–400.00 Hz

Desired Frequency Reached Width 1
Control Mode VF VFPG SVC FOCPG FOCPM Default: 2.00
Settings 0.00–400.00 Hz

Desired Frequency Reached 2
Control Mode
VF VFPG SVC FOCPG FOCPM
Default: 60.00/50.00
Settings 0.00–400.00 Hz

Desired Frequency Reached Width 2
Control Mode VF VFPG SVC FOCPG FOCPM Default: 2.00
Settings 0.00–400.00 Hz
 Once the output frequency reaches the desired frequency and the corresponding multi-function output
terminal is set to 3 or 4 (Pr.02-11–Pr.02-22), this multi-function output terminal is ON.
Brake Release Delay Time when Elevator Starts
Control Mode VF VFPG SVC FOCPG FOCPM Default: 0.250
Settings 0.000–65.000 sec.
Brake Engage Delay Time when Elevator Stops
Control Mode VF VFPG SVC FOCPG FOCPM Default: 0.250
Settings 0.000–65.000 sec.
 When the AC motor drive runs and after the delay time in Pr.02-29, the corresponding multi-function
output terminal (12: mechanical brake release) is ON.
 When the AC motor drive stops and after the delay time in Pr.02-30, the corresponding multi-function
output terminal (12: mechanical brake release) is OFF.
 Use this function with the DC brake function.