Delta VFD-ED Series, Руководство пользователя

Страница: 239 / 389

Ch12 Descriptions of Parameter Settings | VFD-ED
12-28

Multi-function Output Terminal Direction
Control Mode VF VFPG SVC FOCPG FOCPM Default: 0
Settings 0–65535
 This parameter uses bit setting. If the bit is 1, the multi-function output terminal acts in the opposite
direction. For example, if you set Pr.02-11 to 1 and the forward bit is 0, Relay 1 is ON when the drive is
running and OFF when the drive is stopped.
Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
- - MO6 MO5 MO4 MO3 MO2 MO1 R2A R1A MRA RA
Serial Start Signal Selection
Control Mode VF VFPG SVC FOCPG FOCPM Default: 0
Settings 0: According to FWD/REV signal
1: According to Enable drive function signal
 Selects the contactor serial start method.
 0: According to FWD/REV signal, the motor starts to run after the Enable signal MI = 40 is ON.
 1: According to Enable signal, the contactor, mechanical brake and DC brake all follow parameters’ setting
to run after FWD/REV and Enable are ON.
Pr.02-24=0
Enable Drive
0 1
Multi-function
output
MO= 15
0 False False
1 True True
No matter if the Enable Drive function signal outputs or not,
the drive starts to count Pr.02-31 after MO15 .outputs.