Delta VFD-ED Series, Руководство пользователя

Страница: 379 / 389

Appendix B. Revision History

VFD-ED
B-6
Section Subject
Revision/
Addition
Previous Revision Latest Change
Section 6.6.3
condition a), and in
accordance with
EN12015:2014
Section 6.7.2 Table
4, use THD <48%
to comply with
EN12015:2014.
6-5 Zero Phase
Reactor B. Casing
without
mechanical
fixed part\model
selection table Revision T60006L2160V066
Model A diameter:
166.9 mm
Model B diameter:
123.9 mm
T60006L2160V066
Model A diameter:
123.9 mm
Model B diameter:
166.9 mm
7-2 EMED-
PGHSD-1 Terminal name
in the
specification
diagram
Revision
C+, D+ C, D
7-2 EMED-
PGHSD-2 Terminal name
in the
specification
diagram
Revision
C+, D+ C, D
10-2
Explanations for
the Auto-tuning
Steps
10-3
Elevator
Performance
Fine-tuning
1. Step 7\(3)
Start-up
adjustment
(FOCPM)
2. Table for
elevator
performance
fine-tuning
Revision Information related to
Pr.10-23 Information related to
Pr.10-23 deleted
10-3 Elevator
Performance
Fine-tuning 3. (See right) 1. Delete Pr.01-04 and Pr.01-06
2. Only Pr.01-08 corresponds to the “start-up adjustment”
function
3. Delete Pr.10-23 and add Pr.11-06 to make Pr.11-00–Pr.11-06
correspond to the “comfort” function. The functions and
settings for Pr.11-00 are revised.
4. The “comfort” function is added to the “accelerating” stage
(Pr.01-04, Pr.01-06, Pr.11-07, and Pr.11-08)
5. The “comfort” function is added to the “high speed” stage
(Pr.11-08 and Pr.11-09)
6. The “comfort” function is added to the “decelerating” stage
(Pr.01-04, Pr.01-06, Pr.11-07, and Pr.11-08)
7. The “comfort” function is added to the “leveling” stage
(Pr.11-07).
8. Move the “elevator parking” function in the “leveling” stage to
the “stopping” stage and divide its parameters into “elevator
parking” (Pr.01-29, Pr.01-30, and Pr.01-31) function and
“comfort” (Pr.11-19) function.
9. Change the settings for Pr.11-00 “bit0=1: ASR auto-tuning,
enable PDFF” to
：
"bit0=1
：
ASR auto-tuning; PDFF enabled; speed bandwidth
control enabled"
Ch12-G02 Digital
Input / Output
Parameters The description
for Pr.02-10
Digital Input
Operation
Direction Revision For example, set MI1=1
(multi-step speed
command 1) and MI2=2
(multi-step speed
command 2). Then the For example, set MI1=1
(multi-step speed
command 1) and MI2=2
(multi-step speed
command 2). Then the