Delta VFD-ED Series, Руководство пользователя

Страница: 241 / 389

Ch12 Descriptions of Parameter Settings | VFD-ED
12-30
Motor speed/
Output frequenc y
07- 03
D C b ra ke
ti me duri ng
start-up
07- 04
D C b ra ke
ti me duri ng
stopping
Multi-function output
(m echani cal br ak e r el eas e)
Pr.02- 11 to 02-22=12
Mechanical brake
bounce ti me of mechanical brake
RUN/STOP
02-29 Brake release delay time
when elevator starts
RUN STOP
02-30 Brake engage
delay time when
elevator stops
D C b ra ke DC brake
Mechan ical brake release
br ake
e ng age
br ake
eng ag e

Magnetic Contactor Contracting Delay Time between Drive and Motor

Magnetic Contactor Release Delay Time between Drive and Motor
Control Mode VF VFPG SVC FOCPG FOCPM Default: 0.200
Settings 0.010–65.000 sec.
 After running, use these parameters with multifunction input terminal setting 40 (Enable drive function),
and multifunction output terminal setting 15 (motor-controlled magnetic contactor output). When the
multifunction output terminals are ON, the drive starts outputting after the delay time in Pr.02-31. When
the drive stops outputting, multifunction output terminals release after the delay time in Pr.02-32.

MPSCC (Motor Phase Short Circuit Contactor) Release Delay Time between
Drive and Motor
Control Mode
VF VFPG SVC FOCPG FOCPM
Default: 0.200
Settings 0.010~65.000 sec.

MPSCC (Motor Phase Short Circuit Contactor) Contracting Delay Time
between Drive and Motor
Control Mode
VF VFPG SVC FOCPG FOCPM
Default: 0.200
Settings 0.010~65.000 sec.