Delta VFD-ED Series, Руководство пользователя

Страница: 284 / 389

Ch12 Descriptions of Parameter Settings | VFD-ED
12-73
09 Communication Parameters

: You can set this parameter during operation.
When using the communication interface, the diagram
on the right shows the communication port pin
definitions. We recommend that you connect the AC
motor drive to your PC by using Delta IFD6530 or
IFD6500 as a communication converter.

Communication Address
Default: 1
Settings 1–254
 Sets the communication address for the drive if the AC motor drive is controlled through RS-485 serial
communication. The communication address for each AC motor drive must be unique.

Transmission Speed
Control Mode VF VFPG SVC FOCPG FOCPM Default: 19.2
Settings 4.8–115.2 kbps
 Sets the transmission speed between the RS-485 master (PLC, PC, etc.) and the AC motor drive.

Transmission Fault Treatment
Control Mode VF VFPG SVC FOCPG FOCPM Default: 3
Settings 0: Warn and keep operation
1: Warn and ramp to stop
2: Reserved
3: No action and no display
 Determines the treatment if a transmission time-out error (such as disconnection) occurs during
communication.

Time-out Detection
Control Mode VF VFPG SVC FOCPG FOCPM Default: 0.0
Settings 0.0–100.0 sec.
0.0: Disable
 Sets the communication time-out value.

Communication Protocol
Control Mode VF VFPG SVC FOCPG FOCPM Default:13
Settings 0: 7, N, 1 for ASCII
1: 7, N, 2 for ASCII
2: 7, E, 1 for ASCII
3: 7, O, 1 for ASCII
4: 7, E, 2 for ASCII
5: 7, O, 2 for ASCII