Dell OptiPlex GX520, Руководство пользователя

Страница: 212 / 229

Resolving Software and Hardware Incompatibilities
If a device is either not detected during the operating system setup or is detected but incorrectly configured, you can use Device Manager or the Hardware
Troubleshooter to resolve the incompatibility.
Microsoft
®
Windows
®
XP
To resolve incompatibilities using Device Manager:
1. Click the Start button and click Control Panel .
the other cards.
4. Repeat this process until you identify which card is malfunctioning.
Read fault —
Requested sector not found —
Reset failed —
See " Drive Problems ."
Sector not found —
l
Run the Windows error-checking utility to check the file structure on the floppy disk or hard drive. See Windows Help for instructions.
l
If a large number of sectors are defective, back up the data (if possible), and then reformat the floppy disk or hard drive.
Seek error — See " Drive Problems ."
Shutdown failure — Run the Dell Diagnostics .
Time-of- day clock stopped —
Time-of-day not set- please run the System Setup program —
Enter system setup and correct the date or time. If the problem persists, replace the battery .
Timer chip counter 2 failed — Run the Dell Diagnostics .
Unexpected interrupt in protected mode — Run the Dell Diagnostics .
WARNING: Dell's Disk Monitoring System has detected that drive [0/1] on the [primary/secondary] EIDE controller is operating outside of normal
specifications. It is advisable to immediately back up your data and replace your hard drive by calling your support desk or Dell —
If no replacement drive is immediately available and the drive is not the only bootable drive, enter system setup and change the appropriate drive setting to
None . Then remove the drive from the computer.
Write fault —
Write fault on selected drive —
See " Drive Problems ."
< drive letter >:\ is not accessible. The device is not ready — The selected drive cannot read its medium. Depending on its medium type, insert a floppy,
CD, or Zip disk into the drive and try again.