Dell OptiPlex GX520 Скачать руководство пользователя страница 200

Страница: 200 / 229

Printer Problems

Fill out the

Diagnostics Checklist

as you complete these checks.

If the power light is off —

The computer is either turned off or is not receiving power.

Reseat the power cable into both the power connector on the back of the computer and the electrical outlet.

If the computer is plugged into a power strip, ensure that the power strip is plugged into an electrical outlet and that the power strip

is turned on. Also bypass power protection devices, power strips, and power extension cables to verify that the computer turns on
properly.

Ensure that the electrical outlet is working by testing it with another device, such as a lamp.

Ensure that the main power cable and front panel cable are securely connected to the system board.

If the power light is amber and green or steady amber —

A device might be malfunctioning or incorrectly installed.

Remove and then reinstall the memory modules

Remove and then reinstall any cards.

Remove and then reinstall the graphics card, if applicable.

If the power light is blinking amber —

The computer is receiving electrical power, but an internal power problem might exist.

Ensure that the voltage selection switch is set to match the AC power at your location (if applicable).

Ensure that the processor power cable is securely connected to the system board.

Eliminate interference —

Some possible causes of interference are:

Power, keyboard, and mouse extension cables

Too many devices on a power strip

Multiple power strips connected to the same electrical outlet

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

NOTE:

If you need technical assistance for your printer, contact the printer's manufacturer.

Check the printer documentation —

See the printer documentation for setup and troubleshooting information.

Ensure that the printer is turned on

Check the printer cable connections —

See the printer documentation for cable connection information.

Ensure that the printer cables are securely connected to the printer and the computer.

Test the electrical outlet —

Ensure that the electrical outlet is working by testing it with another device, such as a lamp.

Verify that the printer is recognized by Windows —

Click the

Start

button, click

Control Panel

, and then click

Printers and Other Hardware

Click

View installed printers or fax printers

If the printer is listed, right-click the printer icon.

Click

Properties

and click the

Ports

tab. For a parallel printer, ensure that the

Print to the following port(s):

setting is

LPT1 (Printer

Port)

. For a USB printer, ensure that the

Print to the following port(s):

setting is

USB

Reinstall the printer driver —

See the printer documentation for instructions

Содержание OptiPlex GX520






































































































































































































































Результаты поиска

Содержание OptiPlex GX520

Отзывы:

Похожие инструкции для OptiPlex GX520

Бренды по названию

Популярные бренды

Dell OptiPlex GX520, Руководство пользователя

Результаты поиска

Содержание OptiPlex GX520

Отзывы:

Похожие инструкции для OptiPlex GX520

Бренды по названию

Популярные бренды