Dell E35S001, Руководство пользователя

Страница: 72 / 164

Figure 30. Removing a hot swappable hard drive or SSD
a. release button
b. hard drive carrier
c. hard drive carrier handle
Next steps
1. If you are not replacing the hard drive immediately, insert a hard drive carrier blank in the empty hard drive slot, or install a hard drive
carrier.
2. If removed, install the front bezel.
Related tasks
Removing the optional front bezel on page 53
Installing a 3.5-inch hot swappable hard drive carrier blank on page 70
Installing a hot swappable hard drive carrier on page 74
Installing the optional front bezel on page 53
Removing a hot swappable hard drive from a hard drive
carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
NOTE: Hot swappable hard drives are supplied in hot swappable hard drive carriers that fit in the hard drive slots.
1. Keep the Phillips #2 screwdriver ready.
2. Remove the hard drive carrier from the system.
Steps
1. Remove the screws from the side rails on the hard drive carrier.
2. Lift the hard drive out of the hard drive carrier.
72 Installing and removing system components