Figure 72. Removing and installing the PSU divider
a. PSU divider
b. tabs (4)
c. screw
Next steps
1. Install the redundant PSUs or PSU blank as applicable.
2. Reconnect the system to its electrical outlet and power on the system, including any attached peripherals.
Related tasks
Removing a redundant AC power supply unit
on page 112
Removing the power supply unit blank
on page 114
Installing the power supply unit blank
on page 115
Non-redundant AC/cabled power supply unit
Your system supports a non-redundant 350 W AC power supply unit (PSU).
NOTE:
When selecting or upgrading your system configuration, verify the system power consumption with the Dell
Energy Smart Solution Advisor at Dell.com/ESSA to ensure optimum power utilization.
Removing a cabled power supply unit
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Installing and removing system components
117
Содержание E35S001
Страница 2: ......
Страница 164: ...164 Getting help ...
