Dell E35S001, Руководство пользователя

Страница: 82 / 164

support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Align the hooks at the back of the hard drive bay with the slots on the backplane.
2. Slide down the hard drive backplane until the release pin locks into the slot.
3. Connect the SAS, power, and data cables to the hard drive backplane.
Figure 42. Installing an x8 hard drive backplane
1. SAS cable 2. x8 hard drive backplane
3. power connector 4. backplane power cable
5. optical disk drive power cable 6. release pin
7. signal cable
Next steps
1. Install the hard drives in their original locations.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Installing a hot swappable hard drive carrier on page 74
82 Installing and removing system components