Next steps
Remove the 2.5-inch hot swappable hard drive from a 3.5-inch hard drive adapter.
Related tasks
Removing a hot swappable hard drive carrier
on page 71
Removing a 2.5-inch hot swappable hard drive from a 3.5-
inch hard drive adapter
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Keep the Phillips #2 screwdriver ready.
3. Remove the 3.5-inch hard drive adapter from the 3.5-inch hot swappable hard drive carrier.
NOTE:
A 2.5-inch hot swappable hard drive is installed in a 3.5-inch hard drive adapter, which is then installed in the
3.5-inch hot swappable hard drive carrier.
Steps
1. Remove the screws from the side of the 3.5-inch hard drive adapter.
2. Remove the 2.5-inch hot swappable hard drive from the 3.5-inch hard drive adapter.
Figure 37. Removing 2.5-inch hot swappable hard drive from a 3.5-inch hard drive adapter
a. 3.5-inch hard drive adapter
b. screw (2)
c. 2.5-inch hot swappable hard drive
Related tasks
Removing a 3.5-inch hard drive adapter from a 3.5-inch hot swappable hard drive carrier
on page 77
Hard drive backplane
Your system supports an x8 SAS/SATA backplane for 3.5-inch hard drives.
78
Installing and removing system components
Содержание E35S001
Страница 2: ......
Страница 164: ...164 Getting help ...