Figure 66. Installing a processor
1. pin-1 indicator of processor
2. processor
3. slot (2)
4. processor shield
5. socket lever
6. socket keys (2)
7. socket
Next steps
NOTE:
Ensure that you install the heat sink after you install the processor. The heat sink is necessary to maintain proper
thermal conditions.
1. Install the heat sink.
2. Follow the procedure listed in
After working inside your system
on page 52.
3. While booting, press F2 to enter System Setup and check that the processor information matches the new system configuration.
4. Run the system diagnostics to verify that the new processor operates correctly.
Related tasks
Removing the cooling shroud
on page 65
Installing the cooling shroud
on page 66
Removing the processor
on page 106
Installing the heat sink
on page 110
Installing the heat sink
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
NOTE:
This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dell
certified service technicians.
110
Installing and removing system components
Содержание E35S001
Страница 2: ......
Страница 164: ...164 Getting help ...
