Cooling shroud
The cooling shroud aerodynamically directs the airflow across the entire system. The airflow passes through all the critical parts of the
system, where the vacuum pulls air across the entire surface area of the heat sink, thus allowing increased cooling.
Removing the cooling shroud
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
CAUTION:
Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in
shutdown of the system and loss of data.
1. Ensure that you follow the
Safety instructions
on page 51.
2. Follow the procedure listed in
Before working inside your system
on page 52.
Steps
Holding the touch points, lift the cooling shroud away from the system.
Figure 24. Removing the cooling shroud
1. touch point (2)
2. t-handle post on the system board
3. guide pin on the cooling shroud
4. slot (2)
Next steps
1. Install the cooling shroud.
2. Follow the procedure listed in
After working inside your system
on page 52 .
Installing and removing system components
65
Содержание E35S001
Страница 2: ......
Страница 164: ...164 Getting help ...
