Dell E35S001, Руководство пользователя

Страница: 131 / 164

Figure 86. Removing the LCD Module
1. LCD module 2. retention tab
3. LCD cable connector 4. LCD cable
5. screw
Next steps
1. Install the LCD module.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Removing the control panel assembly on page 124
Removing the control panel assembly cover on page 127
Installing the LCD module on page 131
Installing the LCD module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #2 screwdriver ready.
Steps
1. Align the LCD module with the LCD module slot and insert the LCD module into the control panel.
2. Tighten the screw to secure the LCD module to the control panel.
3. Insert the LCD module cable into it’s connector on the control panel board and push the retention tab in to secure the cable.
Installing and removing system components 131