NOTE:
The heat sink and processor are too hot to touch for some time after the system has been powered down. Allow
the heat sink and processor to cool down before handling them.
Steps
1. Loosen one of the screws that secure the heat sink to the system board.
Allow some time (around 30 seconds) for the heat sink to loosen from the processor.
2. Loosen the screw that is diagonally opposite the screw you first removed.
3. Repeat the procedure for the remaining two screws.
4. Lift the heat sink away from the system.
Figure 62. Removing and installing a heat sink
1. slots (4)
2. captive screws (4)
3. heat sink
4. processor socket
Next steps
1. If you are removing only a faulty heat sink, install the replacement heat sink, if not, remove the processor.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Removing the cooling shroud
on page 65
Installing the heat sink
on page 110
Installing the processor
on page 108
Installing the cooling shroud
on page 66
Removing the processor
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
106
Installing and removing system components
Содержание E35S001
Страница 2: ......
Страница 164: ...164 Getting help ...
