Dell E35S001, Руководство пользователя

Страница: 92 / 164

Figure 49. Installing the internal USB memory key
a. USB memory key
b. USB port
Next steps
1. Follow the procedure listed in the After working inside your system section.
2. While booting, press F2 to enter System Setup and verify that the USB memory key is detected by the system.
Expansion cards
An expansion card in the system is an add-on card that can be inserted into an expansion slot on the system board or riser card to add
enhanced functionality to the system through the expansion bus.
Expansion card installation guidelines
Your system supports Generation 3 cards. The following table lists the supported expansion cards:
Table 22. PCI Express Generation 3 expansion cards supported
PCIe Slot Processor Connection Height Length Link Width Slot Width
1 Processor Full Height Half Length x4 x8
2 Processor Full Height Half Length x8 x16
3 Platform Controller Hub Full Height Half Length x1 x1
4 Platform Controller Hub Full Height Half Length x4 x8
NOTE: All slots support Generation 3 PCIe expansion cards.
NOTE: The expansion cards are not hot swappable.
The following table provides a guide for installing expansion cards to ensure proper cooling and mechanical fit. Install the expansion card by
following the card priority and slot priority order as shown in the table.
Table 23. Expansion card installation order
Card Priority Card Type Form factor Slot Priority Maximum Allowed
1 PowerEdge RAID Controller (PERC)
H730 Full Height 2, 1, 4 1
PERC H330 Full Height 2, 1, 4 1
PERC H830 Full Height 2, 1, 4 2
2 10 G NICs Dual Port (Intel) Full Height 2, 1, 4 3
92 Installing and removing system components