Dell E35S001, Руководство пользователя

Страница: 14 / 164

Front panel features and indicators — rack mode
Figure 4. Front panel features and indicators — rack mode
Table 3. Front panel features and indicators — rack mode
Item Indicator, button, or
connector Icon Description
1 Power-on indicator, power
button Enables you to know the power status of the system. The power-
on indicator glows when the system power is on. The power button
controls the power supply output to the system.
NOTE: On ACPI-compliant operating systems, turning
off the system using the power button causes the
system to perform a graceful shutdown before power to
the system is turned off.
2 NMI button
Enables you to troubleshoot software and device driver errors
when running certain operating systems. This button can be
pressed using the end of a paper clip.
Use this button only if directed to do so by qualified support
personnel or by the operating system documentation.
3 System identification button Enables you to locate a particular system within a rack. The
identification buttons are located on the front and back panels.
When one of these buttons is pressed, the LCD panel on the front
and the system status indicator on the back flash until one of the
buttons is pressed again.
Press the system identification button to turn the system ID on or
off
If the system stops responding during POST, press and hold the
system ID button for more than five seconds to enter BIOS
progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup) press and hold
the system ID button for more than 15 seconds.
4 LCD menu buttons Enable you to navigate the control panel LCD menu.
5 Information tag Contains system information such as service tag, NIC, MAC
address, and so on for your reference. The information tag is a
slide-out label panel.
6 LCD panel Displays system ID, status information, and system error messages.
See
LCD panel on page 15.
14 About the Dell PowerEdge T330 system