Dell E35S001, Руководство пользователя

Страница: 13 / 164

Table 2. Front panel features and indicators — four 3.5-inch hot swappable hard drive chassis (continued)
Item Indicator, button, or
connector Icon Description
Use this button only if directed to do so by qualified support
personnel or by the operating system documentation.
3 System identification button Enables you to locate a particular system within a rack. The
identification buttons are located on the front and back panels.
When one of these buttons is pressed, the LCD panel on the front
and the system status indicator on the back flash until one of the
buttons is pressed again.
Press the system identification button to turn the system ID on or
off.
If the system stops responding during POST, press and hold the
system ID button for more than five seconds to enter BIOS
progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup) press and hold
the system ID button for more than 15 seconds.
4 LCD menu buttons Enables you to navigate the control panel LCD menu.
5 Information tag Contains system information such as service tag, NIC, MAC
address, and so on for your reference. The information tag is a
slide-out label panel.
6 LCD panel Displays system ID, status information, and system error messages.
See
LCD panel on page 15.
7 USB management port/iDRAC
Direct port Functions as a regular USB port or provides access to the iDRAC
Direct features. For more information, see the iDRAC Guide at
Dell.com/idracmanuals
.
This port is USB 2.0-compliant
8 USB connector Enables you to connect USB devices to the system. This port is
USB 3.0-compliant.
9 Optical drive or tape drives Enables you to install an optical drive or tape drives. For more
information about supported optical drives and tape drives, see
Optical drives and tape drives (optional) on page 61.
10 Hard drives Enables you to install up to four 3.5-inch (2.5-inch with adapter)
hot swappable hard drives/SSDs.
11 Four-slot hard drive blank Supported on systems with an x8 hard drive backplane configured
for software RAID support. These systems support only four hard
drives, and the remaining hard drive slots are preinstalled with the
four-slot hard drive blank, and cannot be upgraded for additional
storage.
About the Dell PowerEdge T330 system 13