manualshive.com logo in svg

DataCard CD800S, Инструкция по установке и эксплуатации, Страница: 214 / 216

Поделиться
Скачать
DataCard CD800S Скачать руководство пользователя страница 214

 

204

Legal Notices

Safe human interface

Use proper lifting techniques when moving or installing the equipment. 

Use standard electrostatic discharge (ESD) precautions when working on or near 
electrical circuits. 

Do not disconnect safety interlocks on covers. Operate the printer with the cover 
closed. 

Acknowledgments

Polaroid and Polaroid & Pixel are trademarks of PLR IP Holdings, LLC, used under 
license. All other trademarks are the property of the respective owner who has not 
sponsored, endorsed or approved this product. PLR IP Holdings, LLC does not 
manufacture this product or provide any Manufacturer's Warranty or support.

Datacard 

is a registered trademark of DataCard Corporation in the United States and/or 
other countries. PartnerPage is a service mark of DataCard Corporation in the 
United States and/or other countries. The Color Blue with Platinum Flecks mark 
is a registered trademark of DataCard Corporation in the European Union and 
other countries.

Microsoft, Windows, and Windows Vista are trademarks or registered 
trademarks of Microsoft Corporation.

Photoshop is a registered trademark of Adobe Systems Incorporated.

TrueType, Apple, and Bonjour are registered trademarks of Apple Computer, 
Inc.

Mifare is a registered trademark of Philips Semiconductors Gratkorn GMBH. 

Gemplus is a registered trademark and GemPC is a trademark of Gemplus S.C.A. 
Corporation.

iCLASS and HID are registered trademarks of HID Corporation.

All other trademarks are the property of their respective owners.

Fonts

Portions of the software are copyrighted by Red Hat. To access magnetic stripe 
fonts, download the Windows fonts (liberation-fonts.zip) from 
www.redhat.com/promo/fonts.

The Katakana font used in magnetic stripe fonts is copyright 1990-2003 Wada 
Laboratory, the University of Tokyo. All rights reserved.

Содержание CD800S

























































































































































































































Отзывы:

Нет отзывов