DataCard CD800S, Инструкция по установке и эксплуатации

Страница: 203 / 216

193
•
~ is the beginning of the statement
•
XX represents the type of action –
Block Print, Add Topcoat, or
Remove Topcoat.
•
n1 is the distance from the top of
the card to the start of the area
•
n2 is the distance from the left
edge of the card to the start the
area
•
n3 is with width of the area
•
n4 is the height of the area
Each area is a square or rectangular
shape
The card in this example shows the
dimensions of a three-track magnetic
stripe area.
An escape statement can take the place of settings made in Preferences, by
omitting the dimension values. For example. ~PB%? prevents print blocking on a
card.
The escape statement can specify more than one area of the same type by placing
a semicolon (;) character between the sets of values.
Print Blocking
A print blocking escape statement begins with ~PB%
Examples:
~PB%10 10 55 15? Printing is blocked in one area and any print
blocking set in Preferences is not used.
~PB%10 10 5 5;30.5 45.23 15 15? Printing is blocked in two areas and any
print blocking set in Preferences is not used.
~PB%? No printing is blocked and any print
blocking set in Preferences is not used.