Load and motor
100
Configuration
(CONFIG. MODE)
Value:
Speed control, open loop
(SPEED OPEN LOOP)
[0]
Speed control, closed loop
(SPEED CLOSED LOOP)
[1]
Process control, closed loop
(PROCESS CLOSED LOOP)
[3]
Torque control, open loop
(TORQUE OPEN LOOP)
[4]
Torque control, speed feedback
(TORQUE CONTROL SPEED)
[5]
Function:
This parameter is used for selecting the configuration
to which the adjustable frequency drive is to be adap-
ted. This makes adaptation to a given application sim-
ple, because the parameters that are not used in the
given configuration are covered up (not active). By
changing between the different application configura-
tions, bumpless transfer (frequency only) is ensured.
Description of choice:
IfSpeed control, open loop [0] is selected, a normal
speed control (without feedback signal) is obtained,
but with automatic slip compensation, ensuring a near-
ly constant speed at varying loads.
Compensations are active, but may be disabled as re-
quired in parameter group 100.
IfSpeed control, closed loop [1] is selected, a full hold-
ing torque is obtained at 0 rpm, in addition to increased
speed accuracy. A feedback signal must be provided
and the PID regulator must be set.
IfProcess control, closed loop [3] is selected, the in-
ternal process regulator will be activated, thereby en-
abling accurate control of a process with respect to a
given process signal. The process signal can be set
using the actual process unit or as a percentage. A
feedback signal must be supplied from the process,
and the process setpoint must be adjusted.
IfTorque control, open loop [4] is selected, the speed
is regulated and the torque is kept constant. This is
done without a feedback signal, since VLT 5000 ac-
curately calculates the torque on the basis of the cur-
rent measurement.
IfTorque control, speed feedback [5] is selected, an
encoder speed feedback signal must be connected to
the digital terminals 32/33.
Parameter 205
Maximum reference
and parameter 415
Maximum feedback
must be adapted to the application
if [1], [3], [4] or [5] is selected.
101
Torque characteristics
(TORQUE CHARACT)
Value:
High-constant torque (H-CONSTANT TOR-
QUE)
[1]
High-variable torque low (H-VAR.TORQ.:
LOW)
[2]
High-variable torque medium
(H-VAR.TORQ.: MEDIUM)
[3]
High-variable torque high
(H-VAR.TORQ.: HIGH)
[4]
High-special motor characteristics
(H-SPEC.MOTOR CHARACT)
[5]
High-variable torque with low starting torque
(H-VT LOW W. CT-START)
[6]
High-variable torque with medium starting
torque
(H-VT MED W. CT-START)
[7]
High-variable torque with high starting torque
(H-VT HIGH W. CT-START)
[8]
Normal-constant torque
(N-CONSTANT TORQUE)
[11]
Normal-variable torque low
(N-VAR.TORQ.: LOW)
[12]
Normal-variable torque medium
(N-VAR.TORQ.: MEDIUM)
[13]
Normal-variable torque high
(N-VAR.TORQ.: HIGH)
[14]
Normal-special motor characteristics
(N-SPEC.MOTOR CHARACT)
[15]
Normal-variable torque with low constant
starting torque
(N-VT LOW W. CT-START)
[16]
VLT
®
5000 Series
= factory setting, () = display text, [] = value for use in communication via serial communication port
MG.51.C5.22 - VLT
p
is a registered Danfoss trademark.
87
Progra
mming
Содержание VLT 5000 Series
