Cytomedix Angel Скачать руководство пользователя страница 8

Страница: 8 / 88

Angel

cPRP System

Operator’s Manual

Before You Get Started

1. The use of operating or maintenance procedures other than those published by

Cytomedix, Inc., or the use of accessory devices not recommended by Cytomedix,

Inc. may result in poor equipment performance.

Cytomedix, Inc. will not be responsible for patient safety or equipment performance

if the procedures to operate and maintain the Angel

Concentrated Platelet Rich

Plasma (cPRP) System are other than those specified by Cytomedix, Inc. Persons

performing the procedures must be properly trained and qualified.

Any equipment modifications must be performed by qualified persons and be

approved by Cytomedix, Inc. in writing.

All electrical installations must comply with all applicable local electrical codes and

Cytomedix, Inc. specifications.

This equipment meets the following standards in the United States and the user

does not need to provide additional efforts regarding electromagnetic emissions

or immunity:

•  EN 55011, Class A standards (for electromagnetic emissions)
•  EN 61000 (for electromagnetic emissions)
•  IEC 60601-1-2 (2007) (for electromagnetic immunity)
•  Canadian Warning: This equipment is intended for use by healthcare

professionals only. The Angel

Concentrated Platelet Rich Plasma (cPRP)

System may cause radio interference or may disrupt the operation of nearby

equipment. It may be necessary to take mitigation measures, such as re-

orienting or relocating the Angel

Concentrated Platelet Rich Plasma (cPRP)

System or shielding the location.

2. The operator should never touch the data port on the Angel

cPRP System, while at

the same time making contact with the patient, as potential for electrical shock may

result.

3. Place the Angel

Concentrated Platelet Rich Plasma (cPRP) System on a flat, stable

surface. Never try to move the Angel

Concentrated Platelet Rich Plasma (cPRP)

System while the device is in operation. Failure to comply may result in damage to

the Angel

Concentrated Platelet Rich Plasma (cPRP) System and injury may result.

4. Do not use the Angel

Concentrated Platelet Rich Plasma (cPRP) System in the

presence of flammable agents because an explosion and/or fire may result.

5. A trained operator should be present at all times to operate and monitor the Angel

Concentrated Platelet Rich Plasma (cPRP) System during processing.

6. Do not contact any moving parts of the centrifuge or pump while the Angel

Concentrated Platelet Rich Plasma (cPRP) System is in operation. Injury may result.

7. To prevent risk of electrical shock, do not use alternate power plugs or adapters that

disconnect the safety ground.

8. Only Angel

cPRP Processing Sets are approved for patient use with the Angel

Concentrated Platelet Rich Plasma (cPRP) System.

9. Do not use the Angel

cPRP Processing Set if the sterile packaging barrier has

been broken.

Warnings

Содержание Angel

























































































Результаты поиска

Содержание Angel

Отзывы:

Cytomedix Angel, Руководство оператора, Страница: 8 / 88

Результаты поиска

Содержание Angel

Отзывы: