Cytomedix Angel Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 88

Cytomedix Angel Скачать руководство пользователя страница 10

Angel

®

cPRP System

Operator’s Manual

iv

Before You Get Started

1. Carefully read this Operator’s Manual for complete instructions.

2. This product is intended for use by trained medical personnel only.

3. When cleaning the platelet sensor, do not use bleach, abrasive materials or

solvents as they may cause damage to the sensor. Use a mild detergent.

4. Do not place external light sources within 1 meter (3 feet) of the unit when

operating the Angel

®

Concentrated Platelet Rich Plasma (cPRP) System.

External light sources may interfere with the operation of the platelet sensor

and may result in reduced processing efficiency.

5. Do not immerse the pump rotor in cleaning solution. Do not autoclave.

Component damage may result.

6. Prior to first use follow the installation instructions included in this manual.

7. Any device connected to the data port must comply with the applicable IEC

standard for that device.

8. To prevent risk of electrical shock, shut OFF power and unplug the system

from the electrical outlet before performing cleaning procedures or replacing

the fuses.

9. Report immediately to the Cytomedix, Inc. Customer Service Response

Center any of the following conditions. Do not use the Angel

®

Concentrated

Platelet Rich Plasma (cPRP) System until corrective action has been taken:

•  Damaged or worn power cord, plug or receptacle
•  Switches that are loose or do not operate with a positive action
•  A system that has been subject to significant physical damage
•  A system that has given anyone an electrical shock while in use
•  A system that appears to be overheating

10. It is the responsibility of the health care institution to adequately prepare and

identify the product for return shipment. Do not return products that have

been exposed to blood-borne infectious diseases.

11. Due to the possibility of operator exposure to blood-borne pathogens (such

as HIV, hepatitis viruses, bacteria, etc.), Universal Precautions for blood-

borne pathogens should be practiced.

Precautions

Warnings (Cont.)

24. The Angel

®

Concentrated Platelet Rich Plasma (cPRP) System is not intended to

be used directly by the patient. As such a mains power switch is not available to the

user. In case of an emergency, power from the unit can be removed by unplugging

the unit from the electrical socket.

25. Only devices or cables meeting IEC 60950 should be connected to the USB and/

or Ethernet port. Failure to do so may result in operator shock. All cables used in

conjunction with the device should be no longer than 1m (3ft) in length.

«
...
8
9
10
11
12
...
»

Содержание Angel

























































































Отзывы:

Нет отзывов