Cytomedix Angel Скачать руководство пользователя страница 67

Страница: 67 / 88

Angel

cPRP System

Operator’s Manual

5-6

Troubleshooting

Text

Description

Response

No software updates found!

No software updates were found. See “Troubleshooting the Software

Update Process” on page 5-8 for

troubleshooting steps.

No USB storage device found!

The Angel

cPRP System does

not detect any connected USB

storage device.

If you wish to output tally data

or a log file to a USB storage

device, refer to the section

“Troubleshooting the Save

Process” on page 5-8 for

troubleshooting steps.

Output failed!

Output failed while attempting to

save tally data.

Refer to the section

“Troubleshooting the Save

Process” on page 5-8 for

troubleshooting steps.

Save failed!

Output failed while attempting to

save case log file. Or a custom

protocol could not be saved.

Refer to the section

“Troubleshooting the Save

Process” on page 5-8 for

troubleshooting steps.

Past case data lost!

Some or all of the data for past

or current cases has been lost.

No response necessary. Past

case data may not be recovered.

Powerfail protocol not found:

xxxxxx

A powerfail has occurred, and

the given protocol cannot be

found.

The Angel

cPRP System will

automatically select the default

protocol for use. If a different

protocol is desired, select it from

the Protocol pull-down button.

The lost protocol may have to be

recreated before it can be used.

Power was lost before end of

case.

The Angel

cPRP System was

shut down or lost power before

the end of a processing case.

If power was lost in the middle

of a cycle, then the set must be

emptied. A new cycle or case

may then be started.

Redo failed! Undo/redo history

cleared.

An attempt to redo a change

while creating a protocol has

failed.

The undo/redo history has been

cleared. A redo command is not

possible at this time.

Rename failed!

An attempt to rename a protocol

has failed.

Try renaming the protocol again.

Settings lost and were set to

default!

The Angel

cPRP System’s

settings were lost, and the

default settings are being used.

If settings other than the default

are desired, make changes via

the "Settings" tab of the Menu

Screen (see “Settings Tab” on

page 3-21).

Software update is not valid!

The new software downloaded

from the selected source is

corrupt.

Try downloading the software

again. If the problem persists,

download software from a

different source.

The software did not start

successfully. Turn power off

and on. If the problem persists,

download software.

An error occurred while the

Angel

cPRP System was

powering on.

Turn power off and then on. If

the problem persists, contact

the Cytomedix, Inc. Customer

Service Response Center.

This version of software is

already installed on this machine.

The operator has attempted to

install the same software which is

already installed on the machine.

Choose a different version of

software to install.

Содержание Angel

























































































Результаты поиска

Содержание Angel

Отзывы:

Cytomedix Angel, Руководство оператора, Страница: 67 / 88

Результаты поиска

Содержание Angel

Отзывы: