Cytomedix Angel Скачать руководство пользователя страница 71

Страница: 71 / 88

Angel

cPRP System

Operator’s Manual

6-3

Routine Care

Figure 6-2 Software Validated Screen

Figure 6-3 Install Screen

7. To continue with the installation, touch the “Yes” button from the Software

Validated Screen. Touching the “No” button will cancel the installation without

affecting the current system software.

Next you will be prompted with the Install Screen (see Figure 6-3).

The Install Screen displays the software version you wish to install (as well

as the source it has been copied from in parenthesis), and two buttons for

final confirmation.

If you decide you do not wish to install a new software version, touch “No”

from the Install Screen and you will be returned to the current Angel

cPRP System software without any changes to the system occurring.

If the installation is successful, a “Continue” button is displayed on the

Install Screen.

9. Touch the “Continue” button to complete the software installation.

Wait while the installation process completes. This may take several

seconds. Do not shut off the Angel

cPRP System’s power during this time.

Содержание Angel

























































































Результаты поиска

Содержание Angel

Отзывы:

Cytomedix Angel, Руководство оператора, Страница: 71 / 88

Результаты поиска

Содержание Angel

Отзывы: