Cytomedix Angel Скачать руководство пользователя страница 37

Страница: 37 / 88

Angel

cPRP System

Operator’s Manual

3-9

Processing

Saving a Tally Table to a USB Storage Device

Perform the following steps to save the tally table of a case:

1. Ensure that a USB storage device is connected to the USB port of the Angel

Concentrated Platelet Rich Plasma (cPRP) System.

2. If you do not wish to save the tally table of the current case, then follow the

procedure in “Selecting Past Cases” on page 3-8 to select a past case.

3. Touch the “Output” button.

The Output Screen will appear on the Angel

cPRP System’s touch screen

display (see Figure 3-9).

The Angel

cPRP System will then scan for a connected storage device.

While it does this, the text “Searching for connected devices. Please wait…”

will appear on the Output Screen.

If a USB storage device is detected, then the “Output Tally to USB storage

device” button will become enabled.

4. Touch the “Output Tally to USB storage device” button.

A progress bar may briefly appear to monitor the progress of the saving process.

Once the entire tally table has been saved, the text “Output saved” will be

displayed beneath the “Output Tally to USB storage device” button and you will

be returned to the Output Screen.

The Tally Table can be retrieved from the USB storage device via a PC for later

viewing or printing. Each Tally Table is saved in a single text file named with

the format “<Serial Number>-<Case Number>.txt”. So, for example, if the serial

number of the Angel

Concentrated Platelet Rich Plasma (cPRP) System on

which the case is run is “GB0000” and the case number of the saved tally table is

“00030”, then the name of the file which contains the tally table when saved to a

USB storage device would be “GB0000-00030.txt”.

For a detailed explanation

of the Output Screen, read

“Output Screen” on page 3-22.

Figure 3-9 Output Screen

Содержание Angel

























































































Результаты поиска

Содержание Angel

Отзывы:

Cytomedix Angel, Руководство оператора, Страница: 37 / 88

Результаты поиска

Содержание Angel

Отзывы: