Cytomedix Angel Скачать руководство пользователя страница 58

Страница: 58 / 88

Angel

cPRP System

Operator’s Manual

4-5

Programability Option

Follow these steps to set a protocol as the wakeup protocol (selected at power-up).

The wakeup protocol will be the selected protocol by default whenever the Angel

Concentrated Platelet Rich Plasma (cPRP) System is turned on.

1. From the Protocol pull-down button, select the protocol you wish to set as the

wakeup protocol.

2. Touch the “Make this the default (wakeup) protocol” button.

3. Touch the Close button to save the protocol and return to the previously

displayed screen.

Changing the Wakeup Protocol

Follow these steps to delete an existing custom protocol. Note that the Standard

Protocol cannot be deleted.

1. From the Protocol pull-down button, select the protocol you wish to delete.

2. Touch the delete button. The protocol will be deleted and will no longer be

available from the Protocol pull-down button.

3. Touch the Close button to return to the previously displayed screen.

Deleting a Protocol

The “Protocols” tab of the Menu Screen allows you to create a custom protocol

based either on the Standard Protocol or an already existing custom protocol.

To access the “Protocols” tab, touch the Menu button from the Start Screen, and

then touch the “Protocols” tab.

The “Protocols” tab is organized with the following, starting at the top:

• the name of the current protocol

• the “Make this the default (wakeup) protocol” button (unless the selected

protocol is already the wakeup protocol, as is the case in Figure 4-3)

• the Close button

• the six protocol parameters (with the four RPM and Spin Time parameters

within a box)

The Protocols Tab

You may exit the Keyboard Screen without causing any changes to take effect

at any time by touching the Close button located at the upper right corner of

the screen.

4. When finished, touch “Enter” to save the new name and return to the

“Protocols” tab.

5. Touch the Close button to return to the previously displayed screen.

Содержание Angel

























































































Результаты поиска

Содержание Angel

Отзывы:

Cytomedix Angel, Руководство оператора, Страница: 58 / 88

Результаты поиска

Содержание Angel

Отзывы: