Angel
®
cPRP System
Operator’s Manual
3-8
Processing
Selecting Past Cases
By default, both the End of Case Screen and the “Tally” tab of the Menu Screen
only display and allow for the saving of the current case. To select past cases for
display or saving, perform the following steps:
1. Touch the “Past Cases” button (see Figure 3-8).
The Past Cases Screen will appear on the Angel
®
cPRP System’s touch
screen display (see Figure 3-8).
2. From the Past Cases Screen, locate and touch the case you wish to view or
save. Navigate through the list of past cases by touching the arrow buttons
on the right side of the screen.
You will be returned to the End of Case Screen or the “Tally” tab of the Menu
Screen, where you may save the selected case.
You may exit the Past Cases Screen without selecting a case by touching the
Close button located at the upper right corner of the screen.
To return to the current case after viewing or saving a past case, return
to the Past Cases Screen and select the case at the very top of the list
marked “(current)”.
3. Once you are satisfied with the field’s new value, touch the “Enter” button,
located at the lower left corner of the Keyboard Screen.
The value of the field will be saved and you will return to the “Tally” tab or
End of Case Screen.
You may exit the Keyboard Screen without saving any changes by touching
the Close button located at the upper right corner of the screen.
4. Repeat the previous steps for all fields which require modification.
Figure 3-8 Past Cases Screen
For a detailed explanation
of the Past Cases Screen,
read “Past Cases Screen” on
page 3-21.