Cytomedix Angel Скачать руководство пользователя страница 51

Страница: 51 / 88

Angel

cPRP System

Operator’s Manual

3-23

Processing

At the upper left corner of the Output Screen is displayed the case number, as

assigned by the Angel

cPRP System, and, in parentheses, the number of data

lines the selected case contains.

1. Close Button

Touching the Close button will close the Output Screen and return you

to the previously displayed End of Case Screen or “Tally” tab without

saving any data.

2-3. Up and Down Arrow Buttons

If the “Select destination for log file:” field is not highlighted, the

arrow buttons will not be visible. If the field is highlighted, the

arrow buttons will scroll through a list of possible destinations to

which the log file for the selected case may be saved.

“Output Tally to USB storage device” button

Touching the “Output Tally to USB storage device”

button will commence saving the tally table to a

connected USB storage device.

“Output log file to:” Button

Touching the “Output log file to:” button will commence saving

case data to the USB storage device or a network server

selected by the “Select destination for log file:” field.

“Select destination for log file:” Field

Used to select a USB storage device connected to the Angel

cPRP System’s

USB port or a network server. When touched, the “Select destination for log file:”

field will highlight, and the Up Arrow button and Down Arrow button will appear on

the right side of the screen. The arrow buttons can then be used to scroll through

a list of available destinations.

“Re-check devices:” Button

Touching the “Re-check devices:” button will cause the Angel

cPRP System to check for any storage device or network

connected to the USB or Ethernet ports. This feature is useful if the desired

device was not found, or was not properly connected, at the time the “Output”

button was touched.

Содержание Angel

























































































Результаты поиска

Содержание Angel

Отзывы:

Cytomedix Angel, Руководство оператора, Страница: 51 / 88

Результаты поиска

Содержание Angel

Отзывы: