Angel
®
cPRP System
Operator’s Manual
3-7
Processing
1. Touch the button at the bottom of the screen (see Figure 3-6) which
corresponds with the field you wish to enter. For example, touch the “ID”
button to enter a value for the “ID” field (see Figure 3-6). The Keyboard
Screen will be displayed on the Touch Screen user interface (see Figure 3-7).
2. Using the Keyboard Screen, type the desired value for the field.
3. Once you are satisfied with the value you have entered, touch the “Enter”
button, located at the lower right corner of the Keyboard Screen.
The value of the field will be saved and you will return to the “Tally” tab or
End of Case Screen.
You may exit the Keyboard Screen without causing any changes to be saved
by touching the Close button located at the upper right corner of the screen.
4. Repeat the previous steps for all three fields, if desired.
Modifying Optional Data Field Values
The following applies to a current case only. After entering values for the optional
data fields (as described in “Entering Optional Case Data Fields” on page 3-6), you
may modify them before beginning a new case. Once a new case is begun, the
values entered for the “ID”, “Operator”, and “Notes” fields may no longer be modified.
To modify a previously entered value for a field on the current case, perform the
following steps:
1. Touch the button at the bottom of the screen which corresponds with the
field you wish to enter (for example, touch the “ID” button to enter a value for
the “ID” field). The Keyboard Screen will be displayed on the touch screen
display (see Figure 3-7).
The original value of the field will be entered into the text field at the top of
the Keyboard Screen.
2. Modify or make corrections to the field. You may use the “Backspace” button,
located at the top of the Keyboard Screen, to delete characters from the field
one at a time, or the “Clear” button, located at the bottom of the Keyboard
Screen, to delete all characters at once.
Figure 3-7 Keyboard Screen (Text Entry)