COSMOGAS Adveco MYDENS 15B, Инструкция по установке, использованию и техническому обслуживанию

Страница: 54 / 96

54
MYDENS COSMOGAS
7 - USE
7.15 - Access and consultation of user
profile parameters
Each time the appliance is switched on, the “user profile”
opens by default.
To view the parameters can be examined in this profile,
proceed as follows:
1. - Press the RESET button;
2. - The display shows parameter
0.000
;
3. - Press the button up to the parameter
1.000
;
4. - Press the RESET button;
5. - Scroll through the parameters using the keys
and ;
6. - To exit parameter consultation of user profile press the
;
7. - If no key is pressed for more than 60 seconds,
consultation mode is exited automatically;
In this profile the following parameters that have "USER"
access level can be queried.
To access the parameters with "INSTALLER" access level,
follow the chapter 7.16.
Parameter Description of the parameter
Access
level
U.M. Range
Factory
value
Customised
values
0003 Desired heating temperature User °C Value /
0048 Desired DHW temperature User °C Value /
0200 Forcing
(to enter this parameter it is necessary to profile
itself as "installer" (section 7.16)
Installer Test OFF = No forcing
FAN = Fan only at maximum
speed
Lo = Burner at minimum power
Ign = Burner at ignition power
Hi = Burner at maximum power
rEg = Burner at power regulated
by parameter 2014;
Stb = Burner stopped;
LCO01 = Safety input 1 test (N/A)
LCO02 = Safety input 2 test (N/A)
OFF /
0901 Temperature unit of measurement Factory °C/°F C/F C
0902 Pressure unit of measurement Factory bar/psi bar/psi bar
0910 Selection of what to see in the 4 large digits of the
display
User / 0: Display of the temperature
chosen by parameter 0911
1: Status of the burner
2: Alternating display of
temperature and burner status
3: Display of the ok message
0
0911 Selection of the temperature recalled by parameter
0910
User / 0: Heating or DHW according to
the service active at that time
1: Heating
2: DHW
3: N/A
4: Cascade Temperature
0
0997 Display icon test User /
0998 Installer access code Factory Code 0000...9999 0300 /
0999 Factory access code Factory Code 0000...9999 /