COSMOGAS Adveco MYDENS 15B, Инструкция по установке, использованию и техническому обслуживанию, Страница: 45 / 96

45
MYDENS
COSMOGAS
7 - USE
Figure 51
A - Key for reducing the central heating temperature (below the minimum, the central heating is set to OFF)
B - Reset key;
C - Key for switching on and increasing the heating temperature;
D - Burner status (the burner is on when this icon is showing);
E - Heating service status:
Icon off = Central heating off;
Icon on = Central heating active but not in operation;
Icon flashing = Central heating active and in operation;
F - Domestic hot water service status:
Icon off = Domestic hot water off;
Icon on = Domestic hot water active but not in operation;
Icon flashing = Domestic hot water active and in operation;
G - Icon to enter the “installer” menu;
H - Unit of measurement of the pressure displayed;
M - Central heating system pressure (if flashing, pressure is low) or indicator of parameters in the various menus, if the
outdoor temperature sensor is connected, this value will be displayed alternately with the pressure of the heating
system;
N - Temperature of the central heating or domestic hot water or indicator of the values assumed by the various
parameters;
O - Unit of measurement of the temperature displayed;
P - Central heating service adjusted by the outdoor temperature sensor;
Q - Appliance in lockout (sections 7.17.1 and 7.17.2 for the diagnostics);
R - Key for switching on and increasing the temperature of the domestic hot water or for scrolling through and changing
the value of the parameters;
S - Key for reducing the temperature of the domestic hot water (below the minimum, the domestic hot water is set to OFF)
or for scrolling through and changing the value of the parameters;
T - On/off switch;
U - Appliance in frost protection mode;